What problems should be paid attention to in fire fighting construction?

With the continuous development and progress of society, modern buildings continue to stand, the quality of fire construction has become an important guarantee for building safety. Standardized and safe fire fighting construction can prevent and control the occurrence of fire in a timely and effective manner. When a fire occurs, the fire alarm system can quickly detect the fire and remind people of the occurrence of fire through the signal alarm. People can control and extinguish the fire in time through the fire extinguishing system such as fire pump and fire hydrant, and minimize the loss of life and property safety caused by the fire to people. It is an essential condition for fire safety.

Fire protection construction mainly refers to the construction of fire protection facilities such as automatic fire alarm and linkage system, fire water supply and indoor and outdoor fire hydrant system, automatic sprinkler system, gas fire extinguishing system, ventilation and air conditioning system of smoke prevention machine, fire roller shutter, smoke blocking wall and fire door.

It is important to do a good job of fire safety in fire protection construction. With the continuous development of the field of construction engineering in China, building fire protection engineering has become an important part of construction. Due to the complex volume of buildings, complex structures and extensive coverage of fire protection systems, the demand will naturally increase. People have also put forward higher requirements and standards for the fire safety of buildings and the reliability of fire protection systems. In addition to the optimization of engineering design, equipment and materials, fire protection engineering will also require the safety of fire protection construction quality. The quality of the project directly affects the normal operation of the fire fighting facilities, and even leads to the occurrence of fire.

The construction process of fire fighting construction must be carried out in accordance with certain specifications. First of all, installation preparation and preparation of relevant materials should be carried out before construction. Before fire fighting construction, Party A must be assisted in the design review of fire fighting facilities. Without design review or unqualified design review, Party A shall not carry out construction without authorization. Relevant materials must be reported to the fire department and fire fighting construction mobilization permit must be obtained. Materials selected for fire fighting construction must be registered with the fire department and have the permit issued by the fire department. After the fire fighting construction, the debugging and acceptance of the fire fighting system should also be carried out.

The "Fire Protection Law" stipulates that fire protection acceptance shall be carried out in accordance with the law at the end of fire protection construction. Those who have not passed the fire protection acceptance or unqualified acceptance shall be prohibited from being put into use. After the fire control acceptance, if the fire control facilities of the construction project are not well maintained, it is difficult to ensure that they can work normally in the event of a fire. Building fire protection facilities is an important measure to ensure the safety of building fire safety and personnel evacuation, and it is an important part of modern architecture, so the fire control acceptance after the end of fire control construction is also an important part of fire safety.